Edit

title:
issue:
name:

New Pictures:
New Picture Desc:

New Pictures:
New Picture Desc:

New Pictures:
New Picture Desc:

Description

Features (listed items)

Specs Table (in html)

<table border="1" cellpadding="0" cellspacing="0" width="95%" align=center>

<tr>
<td width="50%">
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr>
<td align=centre><img src="/images/epson_ubs01.gif"></td>
<th>Serial RS-232 (UB_S01)
<br>UMD P/N: 9-5019-030-1<br>Epson P/N: C32C823361</th>
</tr>
<tr>
<td colspan="2">Uses a 25 pin DB25 connector
<br>Transmission speeds are up to 19200/38400 bits per second</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>Serial</td>
</tr>
<tr>
  <th>Synchronization</th>
  <td>Asynchronous</td>
<tr>
 <th>Handshaking</th>
 <td>DTR/DSR<br>XON/XOFF</td>
</tr>
<tr>
 <th>Signal Levels</th>
 <td>Mark: -3 to -15V Logic "1"Off<br>
     Space: +3 to +15V Logic "0"On</td>
</tr>
<tr>
 <th>Baud Rate</th>
 <td>2400, 4800, 9600, 19200 bps <br>(38400 bps on some printers)</td>
</tr>
<tr>
 <th>Parity settings</th>
 <td>None, Odd, Even</td>
</tr>
<tr>
 <th>Stop bits</th>
 <td>1 or more</td>
</tr>
<tr>
 <th>Connector(Printer)</th>
 <td>Female DB25</td>
</tr>
</table>
</td>
</tr>
<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ubs09.gif"></td>
<th>Serial RS-232 - High Speed (UB-S09)<br>UMD P/S: 9-5019-033-2<br>Epson P/N: C32C823861</th>
</tr>
<tr>
<td colspan="2">Uses a 9 pin DB9 connector.<br>
Transmission speeds are increased to 115,200 bits per second<br>
This interface also contains a customer display connector to allow greater flexibility</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>Serial</td>
</tr>
<tr>
  <th>Synchronization</th>
  <td>Asynchronous</td>
<tr>
 <th>Handshaking</th>
 <td>DTR/DSR<br>XON/XOFF</td>
</tr>
<tr>
 <th>Signal Levels</th>
 <td>Mark: -3 to -15V Logic "1"Off<br>
     Space: +3 to +15V Logic "0"On</td>
</tr>
<tr>
 <th>Baud Rate</th>
 <td>9600, 19200, 38400, 115200 bps</td>
</tr>
<tr>
 <th>Parity settings</th>
 <td>None, Odd, Even</td>
</tr>
<tr>
 <th>Stop bits</th>
 <td>1 or more</td>
</tr>
<tr>
 <th rowspan="2">Connectors</th>
 <td>Printer: Male DB9</td>
</tr>
<tr><td>Customer Display: Modular</td>
</tr>
</table>
</td>
</tr>
<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr>
<td align=centre><img src="/images/epson_ubs02.gif"></td>
<th>Serial RS-485 (UB-S02)<br>UMD P/N: 9-5019-032-5<br>Epson P/N: C32C823371</th></tr>
<tr>
</tr>
<tr>
<td colspan="2">Uses a 25 pin DB25 connector<br>
Cable length can be increased up to 1000 meters<br>
Transmission speeds using this interface can be up to 19200 bits per second</td>
</tr>
</table>
</td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>Serial</td>
</tr>
<tr>
  <th>Synchronization</th>
  <td>Asynchronous</td>
<tr>
 <th>Handshaking</th>
 <td>DTR/DSR<br>XON/XOFF</td>
</tr>
<tr>
 <th>Signal Levels</th>
 <td>Mark: 2.0V to 5.0V Logic "1"<br>
     Space: 0.0V to 0.8V Logic "0"</td>
</tr>
<tr>
 <th>Baud Rate</th>
 <td>2400, 4800, 9600, 19200 bps</td>
</tr>
<tr>
 <th>Parity settings</th>
 <td>None, Odd, Even</td>
</tr>
<tr>
 <th>Stop bits</th>
 <td>1 or more</td>
</tr>
<tr>
 <th>Connector(Printer)</th>
 <td>Female DB25</td>
</tr>
</table>
</td>
</tr>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ubp02ii.gif"></td>
<th>Parallel (UB-P02II)<br>UMD P/N: 9-5019-031-8<br>Epson P/N:C32C823891</th>
</tr>
<tr>
<td colspan="2">Uses a centronics connector using the IEEE specification which provides bi-directional 
communication at speeds of upto 1.5 Mbytes per second</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>8-bit Parallel</td>
</tr>
<tr>
  <th>Synchronization</th>
  <td>Externally supplied nStrobe signals</td>
<tr>
 <th>Handshaking</th>
 <td>nAck and Busy signals</td>
</tr>
<tr>
 <th>Signal Levels</th>
 <td>TTL compatable</td>
</tr>
<tr>
 <th>Reverse communication (Printer Host):</th>
 <td>Nibble or Byte Mode</td>
</tr>
<tr>
 <th>Connector(Printer)</th>
 <td>Female Centronics 36</td>
</tr>
</table>
</td>
</tr>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ubu01iii.gif"></td>
<th>Universal Serial Bus (UB-U01III)<br>UMD P/N: 9-5019-034-9<br>Epson P/N: C32C824111</th>
</tr>
<tr>
<td colspan="2">Uses a 4 pin USB device connector<br>
USB has a bandwidth of approximately 12 Mbits per second<br>
USB's hot swap capability allows everything to be plugged in and 
unplugged without turning the system off<br>
This interface also contains an Epson customer display connector and a 2 port USB Hub, to allow greater connectivity flexibility</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
  <th>Transmission Type</th>
  <td>USB Bulk transfers (OUT and IN)</td>
</tr>
<tr>
 <th>Transmission Speed</th>
 <td>USB Full speed mode(12MHZ)</td>
</tr>
<tr>
 <th>Power</th>
 <td>USB self powered function device</td>
<tr>
 <th>USB Bus-powered HUB device</th>
 <td>100mA per each Down Stream port</td>
</tr>
<tr>
 <th>USB Hub Down Stream Ports</th>
 <td>2 ports</td>
</tr>
<tr>
 <th>HUB controller current</th>
 <td>100mA</td>
</tr>
<tr>
 <th rowspan="3">Connectors</th>
 <td><b>In: </b>Type B(Square)</td>
</tr>
<tr>
 <td><b>OUT: </b>Type A(Flat)</td>
</tr>
<tr>
 <td><b>Customer Display: </b>Modular</td>
</tr>
</table>
</td>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ubu02iii.gif"></td>
<th>Universal Serial Bus (UB-U02)<br>UMD P/N: 9-5019-037-0<br>Epson P/N: C32C824121</th>
</tr>
<tr>
<td colspan="2">Uses a 4 pin USB device connector<br>
USB has a bandwidth of approximately 12 Mbits per second<br>
USB's hot swap capability allows everything to be plugged in and 
unplugged without turning the system off<br>
This interface contains an Epson customer display connector</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
  <th>Transmission Type</th>
  <td>USB Bulk transfers (OUT and IN)</td>
</tr>
<tr>
 <th>Transmission Speed</th>
 <td>USB Full speed mode(12MHZ)</td>
</tr>
<tr>
 <th>Power</th>
 <td>USB self powered function device</td>
</tr>
<tr>
 <th rowspan="2">Connectors</th>
 <td><b>In: </b>Type B(Square)</td>
</tr>
<tr>
 <td><b>Customer Display: </b>Modular</td>
</tr>
</table>
</td>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<td align=centre><img src="/images/epson_ubu03iii.gif"></td>
<th>Universal Serial Bus (UB-U03II)<br>UMD P/N: 9-5019-041-7<br>Epson P/N: C32C824131</th>
</tr>
<tr>
<td colspan="2">Uses a 4 pin USB device connector<br>
USB has a bandwidth of approximately 12 Mbits per second<br>
USB's hot swap capability allows printer to be plugged in and 
unplugged without turning the system off<br></td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
  <th>Transmission Type</th>
  <td>USB Bulk transfers (OUT and IN)</td>
</tr>
<tr>
 <th>Transmission Speed</th>
 <td>USB Full speed mode(12MHZ)</td>
</tr>
<tr>
 <th>Power</th>
 <td>USB self powered function device</td>
<tr>
 <th rowspan="1">Connector</th>
 <td><b>In: </b>Type B(Square)</td>
</tr>
</table>
</td>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ube01.gif"></td>
<th>Ethernet (UB-E03)<br>UMD P/N: 9-5019-046-2<br>Epson P/N: C32C824541</th>
</tr>
<tr>
<td colspan="2">Uses an RJ45 connector<br>
Data transfer rates are up to 10Mbits per second, for upto 100 meters</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>Ethernet Protocol</td>
</tr>
<tr>
  <th>Data Protocols</th>
  <td>IP, ARP, ICMP, UDP, TCP</td>
<tr>
 <th>Printing Protocols</th>
 <td>LP, LPR, FTP</td>
</tr>
<tr>
 <th>Status Communications</th>
 <td>Direct socket(bi-directional)</td>
</tr>
 <th>Communication Speed</th>
 <td>10baseT</td>
</tr>
<tr>
 <th>Connector(Printer)</th>
 <td>Modular RJ45</td>
</tr>
</table>
</td>
</tr>

<tr>
<td>
<table border="0" cellpadding="10" cellspacing="0" width="100%">
<tr><td align=centre><img src="/images/epson_ubr03.jpg"></td>
<th>Wireless Ethernet (UB-R04)<br>UMD P/N: 9-5019-047-9<br>Epson P/N: C32C824461</th>
</tr>
<tr>
<td colspan="2">Data transfer rates are up to 9.8Mbits per second</td>
</tr>
</table></td>
<td>
<table border="1" cellpadding="1" cellspacing="1" width="100%">
<tr>
 <th>Data Transmission</th>
 <td>IEEE 802.11b Wireless</td>
</tr>
<tr>
  <th>Data Protocols</th>
  <td>IP, ARP, ICMP, UDP, TCP</td>
<tr>
 <th>Printing Protocols</th>
 <td>LP, LPR, FTP</td>
</tr>
<tr>
 <th>Status Communications</th>
 <td>Direct socket(bi-directional)</td>
</tr>
 <th>Communication Speed</th>
 <td>Upto 9.8 Mbps</td>
</tr>
<tr>
 <th>Connection</th>
 <td>Integrated Antenna</td>
</tr>
</table>
</td>
</tr>

</table>

Specs Table (in magic table format)

Price Details: (use cut and paste to insert tabs)